Plasma power supply – recommended spare parts
Hypertherm® recommends that you keep these parts available for the plasma power supply.
| Part number | Description | Designator | Quantity |
|---|---|---|---|
| 428810 | Shield-fluid treatment filter | – | 1 |
| 027005 | Coolant filter (fine) | – | 1 |
| 006113 | Coolant check valve | – | 1 |
| 229640 | Power source: 88 VAC – 264 VAC to 24 VDC | PS1 | 1 |
| 229671 | Power source: 88 VAC – 264 VAC to 48 VDC, 600 W | PS2 | 1 |
| 10085251 | Chopper assembly | Chopper 1 | 1 |
| 10084334 | Kit: XPR® main control Printed Circuit Board (PCB) assembly and wireless tag | PCB1 | 1 |
| 10081573 | Kit: Input/Output (I/O) PCB | PCB5 | 1 |
| 141384 | Fan power distribution PCB | PCB6 | 1 |
| 428893 | Power distribution PCB | PCB7 | 1 |
| 10084820 | Fuse: 15 A, 250 VAC, time delay (on PCB7) | F1, F2 | 2 |
| 108709 | Fuse: 10 A, 250 VAC, time delay (on PCB7) | F3 | 1 |
| 2083971 | Fuse: 15 A, 600 V, Class R (used in 200 V, 208 V, 220 V, 240 V) | F1, F2 | 2 |
| 2083951 | Fuse: 8 A, 600 V, Class R (used in 380 V, 400 V, 415 V, 440 V, 480 V, 600 V) | 2 | |
| 003277 | Pilot arc relay: 24 VDC, coil, 60 A 28 VDC contacts | CR1 | 1 |
| 229697 | Inrush contactor assembly: 80 A, IEC AC-3, 3-phase, 120 VAC | IN_CON | 1 |
| 003276 1 | Main contactor (200 V, 208 V, 220 V, 240 V) | M_CON | 1 |
| 429060 1 | Main contactor assembly (380 V, 400 V, 415 V, 440 V, 480 V, 600 V) | 1 | |
1 Select the part that is the correct voltage for your cutting
system and worksite. | |||