Home
Specifications
Plasma cutting system description and components
The plasma cutting system has at least four primary components and can cut a wide range of metals.
Plasma power supply description
The plasma power supply is a 300 A, 210 VDC constant-current supply. It contains a heat exchanger, fans, and a pump to cool the torch and other electronic components.

Register your new Hypertherm system
Warranty information
Recycling information
Contact us
Safety information
Electromagnetic Compatibility (EMC)
Specifications
- XPR® terminology for plasma cutting
- Plasma cutting system description and components
  The plasma cutting system has at least four primary components and can cut a wide range of metals.
  - Plasma power supply description
    The plasma power supply is a 300 A, 210 VDC constant-current supply. It contains a heat exchanger, fans, and a pump to cool the torch and other electronic components.
  - Gas connect consoles description
    There are four types of gas connect consoles: Core™, CorePlus™, VWI™ (vented water injection), and OptiMix™.
  - TorchConnect console description
    The TorchConnect™ console supplies all power, gas, and cooling connections for connection to the torch.
  - Torch description
    The torch assembly has a torch mount-sleeve, torch receptacle, torch, and water tube.
- Plasma power supply specifications
  The part number and some specifications differ for each type of plasma power supply.
- Gas connect console specifications
  The part number and some specifications differ for each type of gas connect console.
- TorchConnect™ console specifications
  There is one TorchConnect™ console for all XPR® system configurations. Use these dimensions for console mounting or placement.
- Torch specifications
  The dimensions and weight differ for each type of torch and torch sleeve. But the general specifications are the same for all torch configurations.
- Critical raw materials
- Safety and EMC symbols and marks
  You can see different safety and EMC symbols and marks on your system. Each image identifies a specific regional certification.
- IEC symbols
  You can see different IEC symbols on the system. Each image has a specific meaning in the context of operating a plasma cutting system.
Qualifications and Requirements
Installation
Connect for Communication
Coolant Installation
Operation
Maintenance
Diagnostics and Troubleshooting
Parts List
Wiring Diagrams

Plasma power supply description

The plasma power supply is a 300 A, 210 VDC constant-current supply. It contains a heat exchanger, fans, and a pump to cool the torch and other electronic components.

The plasma power supply has support for EtherCAT®, wireless, RS-422 serial, and discrete communication protocols to communicate with a Computer Numerical Control (CNC) or wireless device.

The power-indicator Light Emitting Diode (LED) on the plasma power supply identifies power status:

It illuminates amber when the plasma power supply is receiving electric power and the remote on-off switch is in the OFF position.
It illuminates green when the plasma power supply is receiving electric power and both the standard remote on-off switch and the redundant remote on-off switch (if enabled) are in the ON position.