Cooler description
The cooler is a requirement for cutting system operation. It contains a heat-exchanger and two fans and supplies coolant to the liquid-cooled components of the cutting system.
| Notice | |
|---|---|
LOW COOLANT LEVELS CAN DAMAGE THE CUTTING SYSTEM AND COOLANT
PUMP
There is a risk of serious damage to the cutting system and to the
coolant pump if you operate the cutting system with no coolant or with low
coolant. If your coolant pump is damaged, pump replacement can be
necessary.
Never operate the cutting system if you get a low coolant level
notice.
| |
Inside of
the
cooler are the following components:
- Reservoir
- Pump
- Flow meter
- Filter for coolant
- Heat exchanger
- Two fans for cooling
- Control Printed Circuit Board (PCB)
- Power distribution PCB for the cooler
- Power distribution PCB for the cooler fans
A green power-indicator Light Emitting Diode (LED) on the front illuminates when power is supplied to the cooler.
The cutting system ships without coolant in the reservoir. Before you operate the cutting system, you must fill it with coolant.