Qualifications of service personnel
It can be hazardous to do service and maintenance on industrial cutting systems and equipment.
| Warning | |
|---|---|
  | ELECTRIC SHOCK CAN KILL
The plasma power supply contains dangerous electric voltages that can
seriously injure or kill you. Even if the plasma power supply is turned OFF, you
can still get a serious electric shock if the plasma power supply remains
connected to an electric power source.
Use extreme caution if you do diagnosis or maintenance tasks when the
plasma power supply remains connected to an electric power source and the outer
cover or panels are removed. All work that requires removal of the plasma power
supply outer cover or panels must be done by a qualified technician. Refer to
the Safety and Compliance Manual (80669C) for more safety
information.
|
For your safety and for the best results:
- Always read, understand, and follow all of the safety instructions in this manual, the Safety and Compliance Manual (80669C), and on the labels that are on the cutting system.
- Get adequate training from a knowledgeable source before you do any
service or maintenance on the cutting system or equipment. Note:
The entity responsible for workplace safety where your XPR® cutting system is used must do a risk assessment and establish the criteria for service personnel training and qualifications.
- Do not do any service or maintenance on the cutting system or equipment if you cannot follow all of the safety instructions or if you cannot satisfy the minimum service-personnel qualifications set by workplace safety at your organization. Refer to the Safety and Compliance Manual (80669C), Radio Frequency Warning Manual (80945C), and Before you begin installation.
- Contact a professional repair person who has a license.