Home
Parts List
Cable, hose, and lead parts
Use the following cables, hoses, and leads to connect cutting system components.
Power, CAN, and 5-gas assemblies (VWI™, OptiMix™)

Safety information
Electromagnetic Compatibility (EMC)
Warranty
Specifications
Qualifications and Requirements
Installation
Connect for Communication
Coolant Installation
Operation
Maintenance
Diagnostics and Troubleshooting
Parts List
- Plasma power supply parts
- Cooler parts
- Gas connect console parts
- TorchConnect™ console parts
- Torch assembly
- Torch bracket
- Consumable starter kits
- Other consumable and torch parts
- Cable, hose, and lead parts
  Use the following cables, hoses, and leads to connect cutting system components.
  - Pilot-arc cables with strain relief
  - Negative cables with strain relief
  - Power cable, 120 VAC
    These power cables are 3-position, male-female, 120 VAC cables.
  - Power cables, 220 VAC
    These power cables are 7-position, male-female, 220 VAC cables.
  - Coolant-hose assemblies (cooler to gas connect console)
    This hose assembly has an internal diameter of 1.27 cm (0.50 inch).
  - Coolant-hose assemblies (cooler to plasma power supply)
  - CAN cables
    Controller Area Network (CAN) cables are 5-position, male-female. Two CAN cables are necessary.
  - Pilot-arc and coolant assemblies (Core™, CorePlus™)
  - Power, CAN, and 3-gas assemblies (Core™)
  - Power, CAN, and 4-gas assemblies (CorePlus™)
  - Pilot-arc, coolant, and shield-water assemblies (VWI™, OptiMix™)
  - Power, CAN, and 5-gas assemblies (VWI™, OptiMix™)
  - EtherCAT® CNC interface cables
    The EtherCAT® Computer Numerical Control (CNC) interface cable has the following characteristics: RJ-45 connector, male-male, SF/UTP shield, 2 twisted pairs, 22 AWG.
  - Discrete CNC interface cables
  - Discrete cables for the expansion PCB
  - Serial CNC interface cables
    The serial Computer Numerical Control (CNC) interface cables have the following characteristics: 9-position, D-subminiature (D-sub) connector, male-male, RS-422.
  - Work cables
  - Torch leads
  - Bevel torch leads
  - Oxygen hoses (blue)
    The oxygen hose has RH type "B" female fittings.
  - Nitrogen or Argon hoses (black)
    The nitrogen or argon hose has RH type "B" male fittings.
  - Air hoses (black)
    The air hose has JIC-6 female fittings.
  - Hydrogen or nitrogen-hydrogen (F5) hoses (red)
    The hydrogen or nitrogen-hydrogen (F5) hose has LH type "B" female fittings.
  - Water (optional shield fluid) hoses (blue)
    The water hose has JIC-6 female fittings.
- Preventive maintenance kits
- Tools
- Recommended spare parts
- Descriptions of warning label icons
  This warning label is affixed to some plasma power supplies. It is important that the operator and maintenance technician understand the intent of these warning symbols as described.
Wiring Diagrams

Power, CAN, and 5-gas assemblies (VWI, OptiMix)

Image of the power, Controller Area Network, and 5-gas assembly for VWI or OptiMix.


Part number	Length	Part number	Length
428363	3 m (9.8 feet)	428367	10 m (32.8 feet)
428364	4.5 m (14.8 feet)	428368	15 m (49.2 feet)
428365	6 m (19.7 feet)	-	-
428366	7.5 m (24.6 feet)	-	-