Example of external ohmic contact sense
Refer to this example diagram if it is necessary to change the wiring inside of the TorchConnect™ console so that you can use external ohmic contact sense.
| 1 | Torch |
|---|---|
| 2 | Ohmic wire, inside of torch and torch lead |
| 3 | TorchConnect console |
| 4 | Ohmic wire, torch receptacle to ohmic relay |
| 5 | Ohmic relay |
| 6 | Ohmic wire, ohmic relay to J4 |
| 7 | Ohmic Printed Circuit Board (PCB) |
| 8 | Ohmic wire, J4 to torch lifter or third-party ohmic circuit: pin 1 and pin 2 are connected in the ohmic PCB |
| 9 | Torch lifter or third-party ohmic circuit |
| 10 | Controller Area Network (CAN) connection |