Register your new Hypertherm system
Warranty information
Recycling information
Contact us
Safety information
Where to Find Information
Install and Set Up the Plasma Power Supply
- The Powermax45 SYNC system
  The Powermax45 SYNC® is a portable 45 A plasma cutting system that you can use for many handheld and mechanized cutting and gouging applications. The automatic gas and automatic voltage features make it easy to set up and use the system even if you have limited plasma cutting experience.
- Make sure that you have all the components
  It is important to make sure that you have all the components that come with your Powermax SYNC®.
- Hypertherm plasma power supply ratings
- Cutting specifications
- Correct position for the plasma power supply
  Make sure that the plasma power supply is in a safe position and location before you operate the cutting system.
  - Plasma power supply dimensions and weight
    - Work lead weights
- Connection requirements for electrical power
  Use the Hypertherm® input current ratings to determine conductor sizes for power connection and installation instructions.
- Power cord and plug requirements
- Connect the gas supply
Operate the Plasma System
Cut and Mark with the Hand Torch
Gouge with the Hand Torch
Troubleshoot Common Problems
Complete Regular Maintenance Tasks

Work lead weights


Work lead	Weight
Work clamp with 7.6 m (25 foot) work lead	1.2 kg (2.6 lb)
Work clamp with 15 m (50 foot) work lead	2.1 kg (4.7 lb)

Note:

For hand torch weights, refer to Hand torch weights. For machine torch weights, refer to the Powermax45/65/85/105 SYNC Mechanized Cutting Guide (810480).