Install the display PCB and ribbon cable

  1. Connect the ribbon cable to the display Printed Circuit Board (PCB).
  2. Put the new display board into place in the front panel by pushing it onto the 4 mounting posts.

    Make sure the clips in the front panel snap into place over the PCB.

  3. Push the adjustment knob onto the post on the front panel.
  4. Make sure you plug the ribbon cable into the power PCB as you reattach the front panel.
  5. Complete the following procedures:
    1. Attach the front panel.
    2. Install the plasma power supply cover and handle.
    3. Reconnect the gas supply.
    4. Reconnect the power cord.