Troubleshooting for idle choppers with current
Diagnostic codes 623, 624, 625
Diagnostic codes 623 – 625 identify if current is present in a chopper when the chopper is in an idle state.
Symptoms
| Code | Symptoms | XPR® models | XPR action | Code cancels with... |
|---|---|---|---|---|
| 623 | Chopper 1 is in an idle state, and the chopper current is more than 10 A. | All models | None | Remote on-off |
| 624 | Chopper 2 is in an idle state, and the chopper current is more than 10 A. | XPR300®, XPR460® | ||
| 625 | Chopper 3 is in an idle state, and the chopper current is more than 10 A. | XPR460 |
Corrective action
- Look for 24 VDC from the power sources (J2 pins 1 – 3).
- If you find 24 VDC from the power sources, the chopper is bad.
- Replace the chopper if necessary.