Jump to main content

XPR300® Instruction Manual
Software Version

Home
Diagnostics and Troubleshooting
Troubleshooting procedures for diagnostic codes
Troubleshooting for invalid processes
Troubleshooting flowchart for diagnostic code 716
Refer to these flowcharts for an overview of the troubleshooting process for the 716 diagnostic code.

Register your new Hypertherm system
Warranty information
Recycling information
Contact us
Safety information
Electromagnetic Compatibility (EMC)
Specifications
Qualifications and Requirements
Installation
Connect for Communication
Coolant Installation
Operation
Maintenance
Diagnostics and Troubleshooting
- Safety considerations for troubleshooting
  Before you start troubleshooting for a problem, make sure to read, understand, and comply with all of the safety instructions.
- Initial inspection steps
  Some conditions do not give a diagnostic code. For example, there are no diagnostic codes (and the cutting system does not work) if electric power is removed from the cutting system.
- Diagnostic code conventions
  It is important to know these abbreviations and categories when you see diagnostic codes on the Computer Numerical Control (CNC) or XPR® web interface.
- Diagnostic codes
  Use this table to identify a diagnostic code and where to find more troubleshooting information about it.
- General troubleshooting procedures
- Troubleshooting procedures for diagnostic codes
- PCB information
Parts List
Wiring Diagrams

Troubleshooting flowchart for diagnostic code 716

Refer to these flowcharts for an overview of the troubleshooting process for the 716 diagnostic code.

Flowchart that gives an overview of the troubleshooting process for diagnostic code 716 (1 of 3)

Flowchart that gives an overview of the troubleshooting process for diagnostic code 716 (2 of 3)

Flowchart that gives an overview of the troubleshooting process for diagnostic code 716 (3 of 3)

©2017 – 2025 Hypertherm, Inc.